The self-adhesive holder is glued to the back of the signs. The wall distance is at least 8mm and is adjusted with the screw on the wall. You can also order matching wall buffers. These are then glued to the bottom of the sign. So the sign hangs the same distance from the wall at the top and bottom.
The holder is made of 2mm thick sheet metal and measures 7 x 7 cm. It has a maximum load capacity of 3 kg.
Mounting the mirror mount
To ensure the best possible adhesion, it is essential to clean the surface of the sign with glass cleaner or isopropanol (alcohol) before mounting. There must be no residual moisture. Now you can glue the bracket to the back of the sign. Please observe the curing time of the adhesive. This is 30 minutes. After that you can mount the dowel and screw on the wall. Now hang the sign on the screw.
Suitable for the following of our signs:
Square collage in 40 x 40 cm
Square collage in 80 x 80 cm
Collage in 60 x 40 cm
Collage in 90 x 60 cm
Panorama collage in 90 x 30 cm (but here we recommend two mounts due to the length)
Panorama collage in 120 x 4 cm (but here we recommend two fixings due to the length)